2024-2025 Academic Catalog

Welcome to Virginia Tech! We are excited that you are here planning your time as a Hokie.

View Undergraduate Section View Graduate Section

Explore Programs

Explore programs to find a fit for you.

Search Courses

Explore courses by subject and keyword.

Bachelor of Science in Electrical Engineering

Electrical Engineering Major

Program Curriculum

Course List
Code	Title	Credits
Degree Core Requirements
ECE 1004	Introduction to ECE Concepts (C)	3
ECE 2024	Circuits and Devices (C)	3
ECE 2214	Physical Electronics (C)	3
ECE 2544	Fundamentals of Digital Systems (C)	3
ECE 2714	Signals and Systems (C)	3
ECE 2804	Integrated Design Project (C)	2
ECE 3004	AC Circuit Analysis (C-)	3
ECE 3074	AC Circuit Analysis Laboratory (C-)	1
ECE 3105	Electromagnetic Fields (C-)	3
Subtotal		24
Major Requirements
ECE 2514	Computational Engineering (C)	3
ECE 2564	Embedded Systems (C)	3
ECE 3106	Electromagnetic Fields	3
ECE 3204	Analog Electronics	3
ECE 3274	Electronic Circuits Laboratory II	1
ECE 3304	Introduction to Power Systems	3
ECE 3354	Electric Power Engineering Laboratory	1
ECE 3614	Introduction to Communication Systems	3
ECE 3704	Continuous and Discrete System Theory	3
Subtotal		23
Additional Course Requirements
MATH 2114	Introduction to Linear Algebra	3
MATH 2204	Introduction to Multivariable Calculus	3
STAT 4714	Probability and Statistics for Electrical Engineers	3
Subtotal		9
Elective Courses
Math Elective		3
Secondary Focus Area Electives		9
Free Electives		8
Subtotal		20
Pathways to General Education
Pathways Concept 1 - Discourse
ENGL 1105	First-Year Writing (1F)	3
ENGL 1106	First-Year Writing (1F)	3
ECE 4805 & ECE 4806	Senior Design Project and Senior Design Project (1A)	6
Pathways Concept 2 - Critical Thinking in the Humanities
Select six hours in Pathway 2		6
Pathways Concept 3 - Reasoning in the Social Sciences
Select six hours in Pathway 3		6
Pathways Concept 4 - Reasoning in the Natural Sciences
PHYS 2305	Foundations of Physics	4
PHYS 2306	Foundations of Physics	4
Pathways Concept 5 - Quantitative and Computational Thinking
MATH 1225	Calculus of a Single Variable (5F ; C-)	4
MATH 1226	Calculus of a Single Variable (5F)	4
MATH 2214	Introduction to Differential Equations (5A ; C-)	3
Pathways Concept 6 - Critique and Practice in Design and the Arts
Select three hours in Pathway 6a		3
ENGE 1215 & ENGE 1216	Foundations of Engineering and Foundations of Engineering (6D ; )	4
or ENGE 1414	Foundations of Engineering Practice
Pathways Concept 7 - Critical Analysis of Identity and Equity in the United States
Pathways 7 should be double counted with either Pathways 2, 3, or 6a to avoid taking any additional credit hours.		3
Subtotal		53
Total Credits		129

Secondary Focus Requirement

The ECE secondary focus requirement can be completed in one of two ways:

Focus Areas within ECE

The ECE secondary focus requirement consists of 3 ECE courses (9 credits) at the 3xxx level, 4xxx level, or 5xxx level where at least one course (3 credits) is at the 4xxx or 5xxx level. None of the 3 courses can duplicate a course from the student’s major. All courses used for secondary focus must be taken on an A-F basis. For purposes of satisfying the secondary focus requirements, the sum of the number of hours taken from ECE 4974 Independent Study and ECE 4994 Undergraduate Research cannot exceed 6 credits.

The following courses are also included in the secondary focus:

Course List
Code	Title	Credits
AOE 4654	Space Weather: The Solar Wind and Magnetosphere	3
AOE 4674	Upper Atmosphere/Ionosphere Space Weather	3
CS 3214	Computer Systems	3
CS 4224	Linux Kernel Programming	3
CS 4264	Principles of Computer Security	3
CS 4504	Computer Organization	3
CS 4824	Machine Learning	3

The following courses cannot be used toward secondary focus:

Course List
Code	Title	Credits
ECE 3054	Electrical Theory	3
ECE 3074	AC Circuit Analysis Laboratory	1
ECE 3254	Industrial Electronics	3
ECE 3274	Electronic Circuits Laboratory II	1
ECE 3354	Electric Power Engineering Laboratory	1
ECE 3524	Introduction to Unix for ECE	2
ECE 4944	Cybersecurity Seminar	1

Individualized Secondary Focus

(Must be preapproved by ECE Department)

Electrical and computer engineering has applications across a wide variety of fields, such as medicine, human-computer interaction, finance, and entertainment. People with ECE degrees can be entrepreneurs, patent lawyers, policy makers, and business executives. The individualized secondary focus helps students pursue these interests. This option can be used in place of a pre-defined, in-department secondary focus.

The individualized secondary focus typically is pursued via an already defined university-approved program such as a degree, major, minor, or certificate that the student has declared. Students are encouraged to select courses from these programs, subject to the guidelines below.

To begin this process, students must first meet with their academic advisor.
The student must complete a brief proposal form describing the expected added value to their major. This includes a narrative about how these courses support the student’s career goals and ability to achieve their professional aspirations. This proposal must be approved by the Director of Undergrad Program or designee.
Individualized secondary focus plans must include 3 courses within the following parameters:
1. None of the courses may duplicate the student’s ECE major requirements.
2. None of the courses can be at the 1xxx level (1xxx courses required for university-approved programs, e.g. minors, can be used for a student’s free electives).
3. A maximum of one course can be at the 2xxx level, and only if it is a requirement of a university approved program, or if the course is a prerequisite to one or more of the other two courses in the individualized secondary focus.
4. A minimum of one course must be at the 4xxx level.
If the set of courses is part of an already defined university program, the student should attach documentation to the proposal form.
If the set of three courses are not part of an already defined university-approved program, the student must also obtain written approval from the department that houses the courses.
It is the student’s responsibility to ensure that the set of courses is available to be taken in a timely manner. The ECE department is not responsible for changes of programs elsewhere in the university.

MATH Elective Requirement

Electrical Engineering majors are required to take one math elective course from the following list. Some courses may include prerequisite courses not required for the BSEE curriculum. It is the student’s responsibility to be aware of prerequisites and to ensure that all prerequisites are completed prior to enrolling in the chosen course. Note that courses may be restricted to specific majors during certain semesters.

Enrollment into courses will be based on sufficient resources, including faculty availability and student demand.

Course List
Code	Title	Credits
MATH 2534	Introduction to Discrete Mathematics	3
MATH 3034	Introduction to Proofs	3
MATH 3214	Calculus of Several Variables	3
MATH/CS 3414	Numerical Methods	3
MATH 4445	Introduction to Numerical Analysis	3
MATH 4446	Introduction to Numerical Analysis	3
MATH 4564	Operational Methods for Engineers	3
MATH 4574	Vector and Complex Analysis for Engineers	3

Satisfactory Progress Towards Degree

University Policy 91 outlines university-wide minimum criteria to determine if students are making satisfactory progress towards the completion of their degrees. The ECE Department fully supports this policy. Specific expectations for satisfactory progress for BSCPE and BSEE majors are as follows:

Each student must meet the minimum University-wide criteria as described in Policy 91 and summarized in the Undergraduate Catalog (under Academic Policies)
Upon completing 2 semesters in ECE, students must have satisfactorily completed ECE 2024 Circuits and Devices, ECE 2514 Computational Engineering, ECE 2544 Fundamentals of Digital Systems, MATH 2214 Introduction to Differential Equations, and PHYS 2306 Foundations of Physics
Upon completing 3 semesters in ECE, students must have satisfactorily completed ECE 2804 Integrated Design Project.
Upon attempting 90 credits, BSCPE and BSEE students must have successfully completed 33 credits of in-major courses and have 2.0 overall and in-major GPAs. (The BSCPE and BSEE in-major GPA includes all ECE courses, including repeats).

Graduation Requirements

Each student must complete at least 129 semester credit hours with a minimum overall GPA of 2.00 and a minimum in-major GPA of 2.00. In determining the Electrical Engineering in-major GPA, all ECE courses, including repeats, are used.

Grade Requirement

Students must earn a C or higher in the following ECE courses: ECE 1004 Introduction to ECE Concepts, ECE 2024 Circuits and Devices, ECE 2214 Physical Electronics, ECE 2514 Computational Engineering, ECE 2544 Fundamentals of Digital Systems, ECE 2564 Embedded Systems, ECE 2714 Signals and Systems, ECE 2804 Integrated Design Project.

Statement of Prerequisites

Pre-requisites for each course are listed. In general, all ECE courses require a C- or better in prerequisite courses. Students must earn a C or higher in the ECE courses listed above. There are no hidden prerequisites in this program of study. Prerequisites may change from what is indicated. Be sure to consult the Timetable of Classes or check with your advisor for the most current requirements.

Acceptable Substitutions

MATH 2405H Mathematics in a Computational Context may be substituted for MATH 2114 Introduction to Linear Algebra
MATH 2405H Mathematics in a Computational Context + MATH 2406H Mathematics in a Computational Context may be substituted for MATH 2114 Introduction to Linear Algebra + MATH 2204 Introduction to Multivariable Calculus + MATH 2214 Introduction to Differential Equations
ENGE 4735 Interdisciplinary Design Capstone + ENGE 4736 Interdisciplinary Design Capstone may be substituted for ECE 4805 Senior Design Project + ECE 4806 Senior Design Project. Students who wish to enroll in ENGE 4735/ENGE 4736 must successfully complete all prerequisites for ECE 4805 and must be approved by the Director of the ECE Major Design Experience prior to enrolling. These courses will also count in the in-major GPA.

Foreign Language Requirement

Students must have had 2 years of a foreign language in high school or one year at the college level (6 credit hours) of the same language. College-level credits used to meet this requirement do not count towards the degree.

Roadmap

Plan of Study Grid
First Year
Fall Semester		Credits
ENGE 1215	Foundations of Engineering	2
ECE 1004	Introduction to ECE Concepts (C)	3
ENGL 1105	First-Year Writing	3
MATH 1225	Calculus of a Single Variable (C-)	4
Pathways 2 or 3 or 6a		3
	Credits	15
Spring Semester
ENGE 1216	Foundations of Engineering	2
ENGL 1106	First-Year Writing	3
MATH 1226	Calculus of a Single Variable	4
MATH 2114	Introduction to Linear Algebra (C-)	3
PHYS 2305	Foundations of Physics	4
	Credits	16
Second Year
Fall Semester
ECE 2024	Circuits and Devices (C)	3
ECE 2514	Computational Engineering (C)	3
ECE 2544	Fundamentals of Digital Systems (C)	3
MATH 2214	Introduction to Differential Equations (C-)	3
PHYS 2306	Foundations of Physics (C-)	4
	Credits	16
Spring Semester
ECE 2214	Physical Electronics (C)	3
ECE 2564	Embedded Systems (C)	3
ECE 2714	Signals and Systems (C)	3
ECE 2804	Integrated Design Project (C)	2
MATH 2204	Introduction to Multivariable Calculus (C-)	3
Pathways 2 or 3 or 6a		3
	Credits	17
Third Year
Fall Semester
ECE 3004	AC Circuit Analysis (C-)	3
ECE 3074	AC Circuit Analysis Laboratory (C-)	1
ECE 3105	Electromagnetic Fields (C-)	3
ECE 3704	Continuous and Discrete System Theory	3
STAT 4714	Probability and Statistics for Electrical Engineers (C-)	3
Pathways 2 or 3 or 6a		3
	Credits	16
Spring Semester
ECE 3106	Electromagnetic Fields	3
ECE 3204	Analog Electronics	3
ECE 3274	Electronic Circuits Laboratory II	1
ECE 3304	Introduction to Power Systems	3
ECE 3354	Electric Power Engineering Laboratory	1
ECE 3614	Introduction to Communication Systems	3
Pathways 2 or 3 or 6a		3
	Credits	17
Fourth Year
Fall Semester
ECE 4805	Senior Design Project (C-)	3
Secondary Focus Area course (see list)		3
Secondary Focus Area course (see list)		3
MATH Elective		3
Free Elective		3
	Credits	15
Spring Semester
ECE 4806	Senior Design Project	3
Secondary Focus Area course (see list)		3
Pathways 2 or 3 or 6a		3
Pathways 7 or Free Elective (if Pathways 7 double counted)		3
Free Elective		3
Free Elective		2
	Credits	17
	Total Credits	129